Mitsubishi Outlander Forum banner

Parking assist

3379 Views 9 Replies 3 Participants Last post by  mfprind
Does anyone else notice that when you're pulling in or backing into a garage, mine is a single car that the clearance alarms and displays fine always show? Sometimes it's will blink green all the way around, sometimes only the front and one side? Maybe another update? just 馃 curious lol .
1 - 10 of 10 Posts
Eh? Can you reword that?
When you park your car in the garage, there is a system that helps you park without hitting something. Sometimes it will show green clearance bags, sometimes not.
When you park your car in the garage, there is a system that helps you park without hitting something. Sometimes it will show green clearance bags, sometimes not.
Bands, illustrating safe clearance.
Sometimes if you turn on engine and reverse before system has initialised the bands are not there. But should come on after a few seconds
Sometimes if you turn on engine and reverse before system has initialised the bands are not there. But should come on after a few seconds
They don't. It used to show all the way around. I think it varies by distance to the walls, attaching picture.

Attachments

See less See more
Sometimes if you turn on engine and reverse before system has initialised the bands are not there. But should come on after a few seconds
Also, are you in Canada or us?鉂
They don't. It used to show all the way around. I think it varies by distance to the walls, attaching picture.
Ah ok, i thought you were referring to the lines on the camera.

Do the parking sensors work normally outside your garage?
Also, are you in Canada or us?鉂
Or maybe somewhere else?

My locale is indicated below my screen name
Sometimes if you turn on engine and reverse before system has initialised the bands are not there. But should come on after a few seconds
Different every time. Also different if you back in, or drive in.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top